Tech Specs:
• Dimensions: 44.25 mm x 41.5 mm x 20.2 mm
• Battery Capacity: 350mAh
• Voltage Settings: 3.2V, 3.6V, and 4.2V
• Charging Port: Micro-USB
• Input Voltage: 5V
• Charging Current: 250mA
• Resistance Range: 1.0-9.99ohm
• Chassis Material: Zinc-Alloy
• 10s Preheat Function
• One-Button Opertion
• LED Indicator Light
• Multiple Safety Protections
• Available Colors: Black, Blue, Green, Grey, Orange, Purple, Red, Yellow
What's in the Box?
• 1 x Lookah Snail 2.0 Vape Cart Battery
• 1 x Micro USB Cable
• 1 x User Manual
How to Use the Lookah Snail 2.0 510 Vape Battery?
The Lookah Snail 2.0 Vape Cart Battery is one of the easiest vape batteries to set up, and you can go from unboxing to vaping in less than two minutes with a few simple steps.
Step 1: Screw your 510 vape cartridge onto the Snail 2.0 battery. Ensure that the cartridge is securely in place and that there is no wiggling.
Step 2: Turn on the device by pressing the power button five times quickly.
Step 3: Press the button two times quickly to change the voltage setting. The LED light will light up in different colors to indicate the voltage setting:
Blue LED: 3.2 Volt - Low
Purple LED: 3.6 Volt - Medium
White LED: 4.1 Volt - High
Step 4: Press and hold the button, while inhaling from the mouthpiece.
Step 4.5: The Lookah Snail 2.0 also features a preheat mode that can be activated by pressing the button three times rapidly.
When you enter preheat mode, the light will illuminate and alternate between green and blue. After the 10-second preheat is finished, the light will turn off.
Once your device is pre-heated, your cart is ready for use, just press and inhale.
Step 5: After Session, Press the power button five times quickly to turn off the device.
How to Charge the Lookah Snail 2.0 510 Vape Battery?
Once the power or voltage is running low, the LED light blinking red 10 times to remind the user to charge the battery.
After showing the low-power alert three (3) times, the system will lock the device until it has been recharged.
You can charge the Lookah Snail 2.0 vape cart battery through the included Micro-USB cable.
Conncet the cable to the snail battery, and plug the other end to a 5V wall charger or a computer USB port.
While charging, the LED light flashes red, once it's fully charged, the LED light will change color to green or Cyan.
LED Light Blinking Color Meanings of Snail 510 Vape Battery
Often, the LED light flashing can signify straightforward issues like a depleted battery, connectivity issues, or incorrect setup.
Red - Low Battery;
Green- fully Charged;
Purple - High-Temperature Alarm;
Yellow - Output Short-Circuit;
Blue - Output Overload Alarm.